Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.

How to repair the crack on the side of the action

Post Reply
Message
Author
User avatar
Zeliard
Member
Member
Posts: 275
Joined: Sat Jun 03, 2017 10:27 pm
Age: 40
Location: Southeast US
United States of America

How to repair the crack on the side of the action

#1 Post by Zeliard » Mon Sep 11, 2017 2:28 pm

Originally posted by Candyman.

The side of the action is just about the thinest part of a stock. Any damage in this area has to be fixed or the stock could end up coming apart on you.
In this post I will show you how to repair and reinforce the area.

For this post our Victim will be a 03A3. This is just one of the repairs that this stock needed.
First off the stock needs to be cleaned. I did an Alcohol scrub with 0000 steel wool and Denatured Alcohol.

Image

After the stock was cleaned, you can see where the Alcohol is still in the crack.

Image

On the inside you can see that there is a little bit of wood missing.

Image

I use a dremel tool and cut along the crack and then remove wood from both sides of the crack. Be careful not to cut all the way through the stock.

Image

Next I mixed up some Acraglas and filled the channel that I cut. I then flexed the crack to work the resin into the crack. I then cut two strips of fiberglass cloth and placed them over the channel and add a little more resin on top of the cloth.
Make sure that you remove any air bubbles.

Image

Image

Image

This is an easy area to clamp. Just wrap two scrap pieces of wood with some wax paper, place one on top and one on the bottom and clamp with a C clamp.

Allow the resin to cure then remove the clamp and dress up the repair.

Image

Image

I used a dremel with a milling bit and files to recut the inside of the action area.

Image

I used a file to dress up the outside of the stock.

Image

Allow the resin to cure for 24 hours before you apply your finish.

Image

I hope that this helps out a few of you and if you have any question, just ask.
Last edited by Zeliard on Sun Mar 15, 2020 11:26 pm, edited 1 time in total.
Proud alumni of Transylvanian Polygnostic University. "Know enough to be afraid."

"Vertroue in God en die Mauser".-Faith in God and the Mauser.

"Send lawyers, guns and money." -Warren Zevon

72 usmc
Firearm Fanatic
Firearm Fanatic
Posts: 2324
Joined: Fri Jun 02, 2017 10:28 pm
Age: 68
Location: Menomonee Falls, Wi
United States of America

Re: How to repair the crack on the side of the action -Images Missing-

#2 Post by 72 usmc » Thu Feb 27, 2020 12:57 pm

Wayback Machine link:
https://web.archive.org/web/20150419021 ... 37&t=73356

The 3 missing images
image 6
2qx6kae.jpg

image 7
4tvalk.jpg
image last one completed stock view
2mpgc94.jpg
To old to fight and to old to run, a Jar head will just shoot and be done with you.

User avatar
Zeliard
Member
Member
Posts: 275
Joined: Sat Jun 03, 2017 10:27 pm
Age: 40
Location: Southeast US
United States of America

Re: How to repair the crack on the side of the action

#3 Post by Zeliard » Sun Mar 15, 2020 11:27 pm

Thanks 72USMC. I've filled those in and renamed the post. I may be working from home for a few weeks thanks to this Covid-19 thing so will look into the other posts as well. :)
Proud alumni of Transylvanian Polygnostic University. "Know enough to be afraid."

"Vertroue in God en die Mauser".-Faith in God and the Mauser.

"Send lawyers, guns and money." -Warren Zevon

72 usmc
Firearm Fanatic
Firearm Fanatic
Posts: 2324
Joined: Fri Jun 02, 2017 10:28 pm
Age: 68
Location: Menomonee Falls, Wi
United States of America

Re: How to repair the crack on the side of the action

#4 Post by 72 usmc » Mon Mar 16, 2020 12:37 am

I've filled those in and renamed the post. I may be working from home for a few weeks thanks to this Covid-19 thing so will look into the other posts as well.
Glad to see you are back, for some reason all the older posts you reconstructed at the beginning of the new rebirth of the forum have missing photos. It will be great if they can be restored. I was attempting to rebuild a few of the greats because I thought you were gone. Lots of the early photos are missing & showing:
Screen Shot 2020-03-15 at 11.33.07 PM.png
Screen Shot 2020-03-15 at 11.33.07 PM.png (91.7 KiB) Viewed 2092 times
It is best if photos are posted with the forum method (limit of 5 per reply) so they stay as a resource, too many secondary photo hosts' photos seem to disappear.
To old to fight and to old to run, a Jar head will just shoot and be done with you.

Post Reply

Return to “Stock Care and Replacement Stocks”

Who is online

Users browsing this forum: No registered users and 3 guests