Remington 1903

M1903, M1903A3 and M1917.
Post Reply
Keiths
Registered User
Registered User
Posts: 22
Joined: Thu Sep 14, 2017 9:25 pm
Age: 47
Location: Clovis, New Mexico

Remington 1903

Post by Keiths »

Are the Remington WW2 1903's (not 03a3's) less desirable than earlier ones? If I understand correctly, there were fewer of them made, but prices seen to be lower where I've been looking.
Greenmachine
Junior Member
Junior Member
Posts: 39
Joined: Sat Jun 10, 2017 10:00 am
Age: 43
Location: Missouri

Re: Remington 1903

Post by Greenmachine »

In my area Remington 03's always command a higher price simply because you don't see them that often and like you said they didn't make as many of them before they got there changes approved by the military and rebranded them to the 03A3. But as to the exact number produced I don't know. should have added that maybe the shop your looking at just doesn't distinguish a Remington from any other run of the mill Springfield 03.
Charles Lipscomb
Member
Member
Posts: 311
Joined: Mon Jul 30, 2018 6:10 am
Age: 52
Location: Daytona Beach

Re: Remington 1903

Post by Charles Lipscomb »

Something like 348,000 Remington model 1903 rifles were made before the switch ver to 03A3s.
I built one from a complete action i bought from Springfield Sporters in 1990. I paid 90 bucks shipped after tge 15 $ upgrade to a milled trigger guard.
They had nice selection of All the makers including hi low Springfield and Rock island.
I wasn't thinking collector value, but less wear and. Building a rifle.
Tgen spent another 5-6 chasing parts. The hardest being a decent stock . 65 $ with hg and stock metal from numrich.
Then i muffed it by having the whole thing refinished. :( the avtion had only 30-40 % of its blued finish. I sure could have used this site then. :)

At the time decent 03s were ouy of my price line so i buklt a nice one for less than the going rate. All in including the barrel install was 360.
" The beatings will continue until morale improves."
Management
PennsylvaniaRifleman
Member
Member
Posts: 113
Joined: Wed Jun 07, 2017 6:05 pm
Age: 52
Location: Philadelphia PA

Re: Remington 1903

Post by PennsylvaniaRifleman »

My '03 is a Remington, and I have always felt there is sometimes a bit of bias against an '03 "Springfield" that is not marked "Springfield." Maybe I'm just projecting my own feelings on the matter...
Attachments
Remington M1903 (5).JPG
Remington M1903 (5).JPG (605.44 KiB) Viewed 7329 times
Remington M1903 (2).JPG
Remington M1903 (2).JPG (704.13 KiB) Viewed 7330 times
M67
Member
Member
Posts: 364
Joined: Mon Jun 05, 2017 2:52 pm
Age: 52
Location: Slovenia, Europe

Re: Remington 1903

Post by M67 »

Beautiful rifle!
»You're a disgrace. I'd like to know how you got to be a Captain, anyway. »Yossarian: »You promoted me.« Colonel Cathcart: » That has got nothing to do with it.«
Stew15948
Junior Member
Junior Member
Posts: 26
Joined: Mon Sep 24, 2018 8:38 am
Age: 46
Location: Jackson, MS

Re: Remington 1903

Post by Stew15948 »

Little less sought after it seems but love mine
oddball6
Registered User
Registered User
Posts: 24
Joined: Mon Feb 18, 2019 1:13 pm
Age: 69
Location: glendale . az

Re: Remington 1903

Post by oddball6 »

I have an earlier Pre war Remington 03. The fit and finish on it is beautiful. Eyes are weak now, but it would shoot with the best of them Many of these guns went to our Allies
Mine is marked NZ on the butt. The stocks are stunning walnut
Rick the Librarian
Global Moderator
Global Moderator
Posts: 33
Joined: Wed Jul 05, 2017 8:52 am
Age: 67
Location: Coupeville WA

Re: Remington 1903

Post by Rick the Librarian »

Earlier Remington M1903s (like in the 3,040,000 range and lower) with grasping groove stocks are especially sought after and the truly low serial numbered ones (ca. 3,020,000 and lower) if original, can rival original Springfield and Rock Island M1903s in value.

Obviously, if a mixmaster, that lowers the value by a huge margin.
JonnyDetroit
Junior Member
Junior Member
Posts: 27
Joined: Fri May 17, 2019 8:48 pm
Age: 42
Location: Detroit

Re: Remington 1903

Post by JonnyDetroit »

Are surplus remington barrels readily available? I'm building a 1903 on a Remington frame. I was going to go with a criterion barrel, then I started wondering if it would be better to go with the original parts. Most of my sourced parts are remington made. Not sure if in chasing a fantasy though...
ikesdad
Registered User
Registered User
Posts: 2
Joined: Sun Oct 28, 2018 8:14 pm
Age: 61
Location: Grand Junction, CO

Re: Remington 1903

Post by ikesdad »

I think it's going to be very difficult to locate a Remington barrel to match the receiver, not just a Remington barrel but one from the correct period of manufacture. I have a Criterion on one of my Remington actions and it is excellent.
Post Reply

Return to “United States Rifles”